Nonlinear optimal perturbation growth in pulsatile pipe flow

Abstract Pulsatile fluid flows through straight pipes undergo a sudden transition to turbulence that is extremely difficult to predict. The difficulty stems here from the linear Floquet stability of the laminar flow up to large Reynolds numbers, well above experimental observations of turbulent flow. This makes the instability problem fully nonlinear and thus dependent on the shape and amplitude of the flow perturbation, in addition to the Reynolds and Womersley numbers and the pulsation amplitude. This problem can be tackled by optimising over the space of all admissible perturbations to the laminar flow. In this paper, we present an adjoint optimisation code, based on a GPU implementation of the pseudo-spectral Navier–Stokes solver nspipe, which incorporates an automatic, optimal checkpointing strategy. We leverage this code to show that the flow is susceptible to two distinct instability routes: one in the deceleration phase, where the flow is prone to oblique instabilities, and another during the acceleration phase with similar mechanisms as in steady pipe flow. Instability is energetically more likely in the deceleration phase. Specifically, localised oblique perturbations can optimally exploit nonlinear effects to gain over nine orders of magnitude in energy at a peak Reynolds number of ${\textit{Re}}_{\textit{max}}\approx 4000$ . These oblique perturbations saturate into regular flow patterns that decay in the acceleration phase or break down to turbulence depending on the flow parameters. In the acceleration phase, optimal perturbations are substantially less amplified, but generally trigger turbulence if their amplitude is sufficiently large.